Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize.

  5. Select the setting by referring to the table below.

    Power Window 
    Tester Display
    Default
    Content
    Setting
    Door Key P/W Up
    OFF
    This function is used to close the windows by operating the mechanical key.
    ON or OFF
    Door Key P/W Down
    OFF
    This function is used to open the windows by operating the mechanical key.
    ON or OFF
    P/W Up W/ Transmitter
    OFF
    This function is used to close the windows using the wireless key transmitter.
    ON or OFF
    P/W Down W/ Transmitter
    OFF
    This function is used to open the windows using the wireless key transmitter.
    ON or OFF
    P Window Auto Up
    Avail
    This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side).
    Avail or Not Avl
    P Window Auto Up From Driver
    Avail
    This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch.
    Avail or Not Avl
    RR Window Auto Up
    Avail
    This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH.
    Avail or Not Avl
    RR Window Auto Up From Driver
    Avail
    This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch.
    Avail or Not Avl
    RL Window Auto Up
    Avail
    This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH.
    Avail or Not Avl
    RL Window Auto Up From Driver
    Avail
    This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch.
    Avail or Not Avl
    Door Key Linked Back P/W UP
    AVAIL
    This function is used to close the back door window by operating the mechanical key.
    NOT AVL or AVAIL
    Door Key Linked Back P/W DOWN
    AVAIL
    This function is used to open the back door window by operating the mechanical key.
    NOT AVL or AVAIL


PSD & PBD Operation (w/ Smart Key System) 
Tester Display
Default
Content
Setting
Smart Back Door P/W Up SW
AVAIL
This function is used to permit or disable back door power window up operation via the back door control switch.
NOT AVL or AVAIL
Smart Back Door P/W Down
AVAIL
This function is used to permit or disable back door power window down operation via the back door control switch.
NOT AVL or AVAIL
Smart Back Door P/W Press ON
0.8 sec.
This function is used to change the time that the back door control switch. must be pressed to operate the back door power window.
0.8 sec., 1 sec., 1.2 sec., 1.4 sec.
Back Door P/W UP when half-shut
NOT AVL
This function is used to permit or disable back door power window up operation when the back door is ajar.
NOT AVL or AVAIL