FRONT AXLE HUB (for 2WD) > DISASSEMBLY |
| 1. REMOVE FRONT WHEEL ADJUSTING NUT LH |
![]() |
Using SST and a hammer, unstake the adjusting nut.
![]() |
Using SST, remove the adjusting nut.
| 2. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY LH |
Gently fix the front axle hub in a vise between aluminum plates.
![]() |
Using SST, remove the bearing.
| 3. REMOVE FRONT AXLE HUB OIL SEAL LH |
![]() |
Using a screwdriver, remove the front axle hub oil seal.
| 4. REMOVE PLUG |
![]() |
Using a screwdriver and hammer, remove the plug.