FRONT AXLE HUB (for 2WD) > REASSEMBLY |
| 1. INSTALL PLUG |
![]() |
Using the SST and a hammer, install a new plug.
| 2. INSTALL FRONT AXLE HUB OIL SEAL LH |
![]() |
Using SST and a press, press in a new oil seal.
| 3. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY LH |
![]() |
Using SST and a press, install a new bearing to the front axle hub.
| 4. INSTALL FRONT WHEEL ADJUSTING NUT LH |
![]() |
Using SST, install a new adjusting nut.