Home › Drivetrain ยท AXLE AND DIFFERENTIAL › REAR AXLE SHAFT

REAR AXLE SHAFT > INSPECTION

for Preparation Click here



1. INSPECT REAR AXLE SHAFT


R012254E01
  1. Using a dial indicator, measure the rear axle shaft runout and flange runout.

    Maximum runout:
    Shaft runout: 1.50 mm (0.0591 in.)
    Flange runout: 0.05 mm (0.00197 in.)

    If the rear axle shaft or flange is damaged or worn, or the runout is more than the maximum, replace the rear axle shaft.