Home › Brake › BRAKE SYSTEM (OTHER) › HYDRAULIC BRAKE BOOSTER

HYDRAULIC BRAKE BOOSTER > INSPECTION

for Preparation Click here



1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY


    F051410E02
  1. Apply battery voltage to the brake booster pump cables, and check the operation of the pump motor.

    OK::
    Measurement Condition
    Specified Condition
    Battery positive (+) voltage → Red cable terminal
    Pump motor operates
    Battery negative (-) voltage → Black cable terminal

    Text in Illustration 
    *1
    Red Cable
    *2
    Black Cable
    If the result is not as specified, replace the brake booster pump assembly.