FRONT SPEED SENSOR > INSTALLATION |
| 1. INSTALL FRONT SPEED SENSOR |
Install the speed sensor with the bolt.
| 2. INSTALL SKID CONTROL SENSOR CLAMP |
Install the skid control sensor clamp with the bolt.
| 3. INSTALL FRONT SKID CONTROL SENSOR WIRE |
Connect the connector as follows.
for LH:
1. Attach the connector, and then connect the connector.
for RH:
1. Install the skid control sensor clamp with the bolt.
Install the 2 harness clamps with the 2 bolts.
Install the 2 harness clamps with the 2 bolts.
Attach the clip.
Connect the connector.
| 4. INSTALL FRONT WHEEL |
| 5. CHECK SPEED SENSOR SIGNAL |
Check the speed sensor signal (Click here).