Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM

VEHICLE STABILITY CONTROL SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



C292320E01


C292321E01


C292323E01


C293306E01


C292322E01


Communication Table 
Sender
Receiver
Signal
Line
ECM
Skid control ECU
  1. Engine speed signal
  2. Accelerator pedal position signal
  3. Intake air temperature signal
  4. Shift position signal
  5. TC terminal status
CAN communication
Skid control ECU
ECM
  1. Yaw rate and acceleration signal
  2. VSC data signal
  3. Wheel speed signal
CAN communication
Skid control ECU
Combination Meter Assembly
  1. Warning/indicator light signal
  2. Vehicle speed signal
  3. Meter Buzzer signal
CAN communication
Four wheel drive control ECU
Skid control ECU
  1. 4WD status signal
  2. L4 status signal
CAN communication
Steering Angle Sensor (Spiral Cable Sub-assembly)
Skid control ECU
Steering angle signal
CAN communication