Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

POWER STEERING SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK POWER STEERING ECU ASSEMBLY

C214366E07

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    F41-3 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    F41-2 (CANL) - F41-1 (CANH)
    W - L
    CAN communication
    Ignition switch off
    54 to 69 Ω
    F41-5 (IG) - F41-3 (GND)
    G - W-B
    IG power supply
    Ignition switch ON
    11 to 14 V
    F41-7 (SOF+) - F41-8 (SOF-)
    V - LG
    Power steering solenoid valve signal
    1. Engine idling
    2. Steering wheel turned to right or left
    Pulse generation
    If the result is not as specified, the ECU may have a malfunction.