Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE NO. 1 HEADLIGHT BULB


    E280428
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow and pull to remove it.



2. REMOVE HEADLIGHT SOCKET COVER


    E282896
  1. Turn the headlight socket cover in the direction indicated by the arrow and pull to remove it.



3. REMOVE NO. 2 HEADLIGHT BULB
  1. Disconnect the connector.



    E282897
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow and pull to remove it.



4. REMOVE FRONT SIDE MARKER LIGHT SOCKET


    E282899
  1. Turn the socket in the direction indicated by the arrow and pull to remove the front side marker light socket with the front side marker light bulb.



5. REMOVE FRONT SIDE MARKER LIGHT BULB
  1. Remove the front side marker light bulb from the front side marker light socket.



6. REMOVE FRONT TURN SIGNAL LIGHT SOCKET


    E282900
  1. Turn the socket in the direction indicated by the arrow and pull to remove the front turn signal light socket with the front turn signal light bulb.



7. REMOVE FRONT TURN SIGNAL LIGHT BULB
  1. Remove the front turn signal light bulb from the front turn signal light socket.