Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.



2. INSTALL FRONT TURN SIGNAL LIGHT SOCKET


    E282901
  1. Turn the front turn signal light socket in the direction indicated by the arrow to install it.



3. INSTALL FRONT SIDE MARKER LIGHT BULB
  1. Install the front side marker light bulb to the front side marker light socket.



4. INSTALL FRONT SIDE MARKER LIGHT SOCKET


    E282902
  1. Turn the front side marker light socket in the direction indicated by the arrow to install it.



5. INSTALL NO. 2 HEADLIGHT BULB


    E282903
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow to install it.

  1. Connect the connector.



6. INSTALL HEADLIGHT SOCKET COVER


    E282904
  1. Turn the headlight socket cover in the direction indicated by the arrow to install it.



7. INSTALL NO. 1 HEADLIGHT BULB


    E280430
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow to install it.