ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) > DTC CHECK / CLEAR |
| CHECK FOR IMMOBILISER DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Check for DTCs.
| CHECK FOR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Check for DTCs.
| CLEAR IMMOBILISER DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Clear the DTCs.
| CLEAR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Clear the DTCs.