SLIDING ROOF SYSTEM > INITIALIZATION |
| INITIALIZE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY |
Initialization
| Condition of Sliding Roof | Proceed to |
| The auto slide open and close/tilt up and down function does not operate. | Procedure A |
| The sliding roof automatically moves, but the sliding roof glass does not stop at the correct position (displacement occurs) or the sliding roof glass moves in the reverse direction during the tilt down operation. | Procedure B |
| The sliding roof automatically moves, but the sliding roof glass moves in the reverse direction during the slide close operation. | Procedure C |
| When drive parts or the sliding roof glass is removed/installed or replaced. | Procedure D |
Procedure A
Procedure B
Procedure C
![]() |
Procedure D
| *1 | Matchmark A |
| *2 | Matchmark B |
| *3 | Protective Tape |
![]() | Slide |