WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) > OPERATION CHECK |
| NOTICES WHEN CHECKING |
Wireless door lock/unlock function:
This function operates only when the vehicle is in its initial condition (the following 3 conditions are met).
The operational range of the wireless transmitter differs depending on the situation.
| CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS |
Make sure the vehicle is in a condition in which the wireless control functions can be operated (see above).
Check the basic functions:
Check the chattering prevention function:
When a switch is pressed, check that the corresponding operation occurs only once. When the switch is held down, check that the corresponding operation occurs only once and does not repeatedly activate. Lastly, when the switch is pressed at 1 second intervals, check that the corresponding operation activates once for each press of the switch.
Check the answer-back function:
Check the automatic locking function:
When all the doors are unlocked with the unlock switch and none of the doors are opened or locked within 60 seconds, check that the doors are relocked automatically.
Check the switch operation fail-safe function:
If the key is in the ignition key cylinder, check that the doors cannot be locked by the lock switch. However, this does not apply when the system is in recognition code registration mode.
Check the illuminated entry function:
Check the door ajar warning function:
Check the panic alarm function.