Check for continuity of the window glass antenna wire.
Text in Illustration
*a
Tester Probe
*b
Window Glass Antenna Wire
*c
Tin Foil
HINT:
Check for continuity at the center of each window glass antenna wire as shown in the illustration.
NOTICE:
When cleaning the rear quarter window assembly, wipe it in the direction of the window glass antenna wire with a soft dry cloth. Take care not to damage the window glass antenna wire. Do not use detergents or glass cleaners with abrasive ingredients.
When measuring resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the window glass antenna wire with your finger, as shown in the illustration.
OK:
There is continuity in the window glass antenna wire.
If the result is not as specified, repair the window glass antenna wire.