Home › Vehicle Interior › HEATING / AIR CONDITIONING › PTC HEATER ASSEMBLY

PTC HEATER ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT QUICK HEATER ASSEMBLY


    E200488E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-3 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω

    1. If the result is not as specified, replace the quick heater assembly.
    Text in Illustration 
    *1
    Connector A
    *2
    Connector B
    *a
    Component without harness connected
    (Quick Heater Assembly)