Home › Audio / Visual / Telematics › AUDIO / VIDEO › BACK DOOR SPEAKER

BACK DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 8 Speakers)


    E144966E37
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    4 Ω

    1. If the result is not as specified, replace the rear No. 2 speaker assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Rear No. 2 Speaker Assembly)



2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 9 Speakers)
  1. Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one.

    OK:
    Malfunction disappears.