Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    C1544    High Engine Revolution Signal

for Preparation Click here


DESCRIPTION

The power steering ECU assembly receives engine speed signals from the ECM via CAN communication. The power steering ECU assembly provides appropriate assisting force in accordance with the engine speed signal.

DTC Code
DTC Detection Condition
Trouble Area
C1544
An abnormal engine speed signal is received.
  1. SFI system
  2. CAN communication system
  3. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0100 is output (Click here).
    Result 
    Result
    Proceed to
    DTC U0100 is not output
    A
    DTC U0100 is output
    B

    HINT:
    DTC U0100 indicates a CAN communication malfunction in the power steering system.



B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A


2.CHECK OTHER DTC OUTPUT (SFI SYSTEM)
  1. Using the Techstream, check for DTCs and confirm that there are no problems in the SFI system (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO SFI SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)