Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    C15F1    Steering Angle Sensor Circuit

for Preparation Click here


DESCRIPTION

The power steering ECU assembly receives steering angle signals from the steering angle sensor via CAN communication. The power steering ECU assembly provides appropriate assisting force in accordance with the steering angle signal.

DTC Code
DTC Detection Condition
Trouble Area
C15F1
An abnormal steering angle signal is received.
  1. Steering angle sensor
  2. CAN communication system
  3. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0126 is output (Click here).
    Result 
    Result
    Proceed to
    DTC U0126 is not output.
    A
    DTC U0126 is output.
    B

    HINT:
    DTC U0126 indicates a CAN communication malfunction in the power steering system.



B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A


2.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)
  1. Using the Techstream, check for DTCs related to the steering angle sensor and confirm that there are no problems in the vehicle stability control system (Click here).
    Result 
    Result
    Proceed to
    DTC is not output.
    A
    DTC is output.
    B



B
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)