Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › ACCELERATOR PEDAL

ACCELERATOR PEDAL > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
  1. Avoid physical shocks to the accelerator pedal sensor assembly.
  2. Do not disassemble the accelerator pedal sensor assembly.
  3. This accelerator pedal does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



    A221411
  1. Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 nuts and accelerator pedal sensor.