Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY
  1. Remove SST from the extension housing.

    SST
    09325-40010  

  1. Install the propeller shaft assembly to the extension housing.

  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }