Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT ASSEMBLY


    C098700E07
  1. Place matchmarks on the propeller shaft flange and differential flange.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts, 4 bolts and 4 washers.



    C098710E02
  1. Remove the propeller shaft.

  1. Insert SST into the transmission to prevent oil leakage.

    SST
    09325-40010