Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 4WD)

PROPELLER SHAFT ASSEMBLY (for 4WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT ASSEMBLY


    C098699E06
  1. Place matchmarks on the propeller shaft flange and transfer flange.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts, 4 washers and propeller shaft assembly.



    C098700E06
  1. Place matchmarks on the propeller shaft flange and differential flange.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts, 4 bolts and 4 washers.