Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON and turn the Techstream on.

  3. Enter the following menus: Body Electrical / Trouble Codes.

  4. Check for DTCs.


CLEAR DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON and turn the Techstream on.

  3. Enter the following menus: Body Electrical / Trouble Code.

  4. Clear the DTCs.