Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER (w/o REAS)

REAR SHOCK ABSORBER (w/o REAS) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE REAR WHEEL


2. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
  1. Support the rear axle housing.



    D028132
  1. Remove the bolt and disconnect the rear shock absorber assembly LH from the rear axle housing.



    D028133
  1. Remove the nut, cushion No. 1 and rear shock absorber assembly LH.

  1. Remove the cushion No. 2 from the shock absorber assembly rear LH.