REAR COIL SPRING > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. REMOVE REAR STABILIZER LOWER BRACKET (w/ KDSS) |
![]() |
Remove the 4 bolts and 2 rear stabilizer lower brackets.
| 3. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH |
Support the rear axle housing.
![]() |
Remove the bolt on the lower side of the shock absorber.
Disconnect the shock absorber from the axle housing.
| 4. DISCONNECT REAR FLEXIBLE HOSE |
![]() |
Disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
Remove the 2 clips.
Remove the rear flexible hose.
![]() |
Disconnect each brake tube from the rear flexible hose with a union nut wrench while holding the rear flexible hose with a wrench.
Remove the 2 clips.
Remove the rear flexible hose.
| 5. REMOVE REAR COIL SPRING LH |
While lowering the axle housing, remove the coil spring.
| 6. REMOVE HOLLOW SPRING SUB-ASSEMBLY |
Remove the hollow spring from the frame.