Home › Suspension › REAR SUSPENSION › REAR LOWER ARM

REAR LOWER ARM > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE REAR WHEEL


2. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
  1. Remove the bolt and disconnect the No. 3 parking brake cable assembly.



3. REMOVE LOWER CONTROL ARM ASSEMBLY LH


    D028142
  1. Remove the nut and bolt from the rear axle housing.

    HINT:
    Turn the bolt while holding the nut.



    D028250
  1. Remove the nut, bolt and lower control arm assembly.

    HINT:
    Turn the bolt while holding the nut.