Home › Suspension › REAR SUSPENSION › REAR LATERAL CONTROL ROD

REAR LATERAL CONTROL ROD > INSTALLATION

for Preparation Click here



1. TEMPORARILY INSTALL REAR LATERAL CONTROL ROD ASSEMBLY
  1. Temporarily install the lateral control rod assembly with the bolt and nut.

  1. Temporarily tighten the bolt.



2. STABILIZE SUSPENSION
  1. Lower the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



3. TIGHTEN REAR LATERAL CONTROL ROD ASSEMBLY


    D028256E01
  1. Tighten the 2 bolts.

    Torque:
    130 N*m{ 1326 kgf*cm , 96 ft.*lbf }

    HINT:
    Turn the bolt while holding the nut.