VANE PUMP > DISASSEMBLY |
| 1. SECURE VANE PUMP ASSEMBLY |
![]() |
Using SST, secure the vane pump in a vise.
| 2. REMOVE SUCTION PORT UNION |
![]() |
Remove the bolt and suction port union from the vane pump.
Using a screwdriver, remove the O-ring from the suction port union.
| 3. REMOVE VANE PUMP REAR HOUSING |
![]() |
Remove the 4 bolts and vane pump rear housing from the vane pump front housing.
![]() |
Using a screwdriver, remove the O-ring from the vane pump rear housing.
| 4. REMOVE VANE PUMP SHAFT WITH PULLEY |
![]() |
Using 2 screwdrivers, remove the snap ring from the vane pump shaft.
Remove the vane pump shaft with pulley.
| 5. REMOVE VANE PUMP ROTOR |
![]() |
Remove the 10 vane pump plates.
Remove the vane pump rotor from the vane pump front housing.
| 6. REMOVE VANE PUMP CAM RING |
![]() |
Remove the cam ring from the vane pump front housing.
| 7. REMOVE VANE PUMP FRONT SIDE PLATE |
![]() |
Remove the front side plate from the vane pump front housing.
![]() |
Using a screwdriver, remove the O-ring from the front side plate.
![]() |
Remove the O-ring from the vane pump front housing.
| 8. REMOVE VANE PUMP HOUSING OIL SEAL |
![]() |
Using a screwdriver and piece of cloth, pry out the oil seal.
| *a | Cloth |