Home › Suspension › SUSPENSION CONTROL › STABILIZER CONTROL VALVE (w/ KDSS)

STABILIZER CONTROL VALVE (w/ KDSS) > DISPOSAL

for Preparation Click here



1. DISPOSE OF STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY


    C214837E01
  1. Using a drill, make a hole in the areas of the accumulator housing indicated in the illustration to discharge the gas inside.

    CAUTION:
    1. Be careful and always use the proper safety equipment when drilling because shards of metal may fly about.
    2. The gas is colorless, odorless and non-poisonous.