Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING VALVE

TIRE PRESSURE WARNING VALVE > DISPOSAL

for Preparation Click here


HINT:
The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.



1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER


C147102
  1. Use the tip of a screwdriver to pry off the back cover.



    C151530E04
  1. The battery and base board, which is covered with resin, are exposed. While taking out the battery, cut the 2 terminals that connect the battery to the base board.
    Text in Illustration 
    *1
    Lithium Battery
    *2
    Terminal