AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting | Relevant ECU |
| Set Temperature Shift | Normal | Function to set the temperature shift. | +2 C, +1 C, Normal, -1 C or -2 C | Air conditioning amplifier assembly |
| Compressor Mode | Automatic | Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. | Automatic or Manual | Air conditioning amplifier assembly |
| Foot/DEF Auto Mode | ON | Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. | ON or OFF | Air conditioning amplifier assembly |
| Foot/DEF Automatic Blow Up Function | ON | Function to change the blower level automatically when the front defroster is on. | ON or OFF | Air conditioning amplifier assembly |
| Add Foot Air in FACE Mode | ON | When the FACE mode is selected, an additional amount of air is blown to the foot area. | ON or OFF | Air conditioning amplifier assembly |