Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS

OUTER REAR VIEW MIRROR GLASS > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE OUTER MIRROR LH
  1. Put protective tape around the outer mirror LH.



    B354456E01
  1. Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
    Text in Illustration 
    *1
    Moulding Remover
    *2
    Protective Tape



    B354457E01
  1. Using a moulding remover, detach the 2 claws of the outer mirror LH as shown in the illustration.
    Text in Illustration 
    *1
    Moulding Remover
    *2
    Protective Tape



    B354477
  1. Disconnect the connector and remove the outer mirror LH.