Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY

SECURITY HORN ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE AIR CLEANER CAP AND HOSE


    A224721
  1. Remove the air cleaner cap and hose.

    1. Disconnect the mass air flow meter connector, vacuum hose and ventilation hose and detach the 4 clamps.

    2. Loosen the clamp.

    3. Unfasten the 4 hook clamps, and then remove the bolt and air cleaner cap and hose.



2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
  1. Remove the air cleaner filter element sub-assembly.



    A224715
  1. Detach the wire harness clamp.

  1. Remove the 3 bolts and air cleaner case sub-assembly.



3. REMOVE SECURITY HORN ASSEMBLY


    B240476
  1. Disconnect the connector.

  1. Remove the bolt and horn.