ELECTRICAL KEY OSCILLATOR (for Front Floor) > INSTALLATION |
| 1. INSTALL INDOOR NO. 1 ELECTRICAL KEY ANTENNA ASSEMBLY |
![]() |
Attach the clamp to install the indoor No. 1 electrical key antenna.
Connect the connector.
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
Attach the 10 clips to install the upper console panel sub-assembly.

| *A | for VF2A | *B | for VF2BM, VF4BM |
| *C | for 2WD | - | - |
| 3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A) |
![]() |
Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.
| 4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.