Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › MASS AIR FLOW METER

MASS AIR FLOW METER > INSPECTION

for Preparation Click here



1. INSPECT MASS AIR FLOW METER


    A227936E01
  1. Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter in the areas shown in the illustration.

    OK:
    There is no foreign matter.

    Text in Illustration 
    *1
    Platinum Hot Wire (Heater)
    If the result is not as specified, replace the mass air flow meter.