Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



ILLUMINATION CONTROL SYSTEM (Illuminated Entry System)
  1. The illuminated entry system has the following control functions:

    Control
    Outline
    Lighting
    Actuation Area-linked*1
    When a registered key enters any actuation area around the doors, the lights that operate turn on.
    1. Engine switch illumination
    2. Map light assembly
    3. No. 1 room light assembly
    4. Door mirror foot light
    Door Lock/Unlock-linked
    When any door is unlocked, the lights that operate turn on.
    1. Engine switch illumination*1
    2. Ignition key cylinder light*2
    3. Map light assembly
    4. No. 1 room light assembly
    5. Door mirror foot light
    6. Interior foot light
    7. Inside handle illumination
    When all doors are closed, the lights that operate turn off.
    Door Open/Close-linked
    When any door is opened, the lights that operate turn on.
    1. Engine switch illumination*1
    2. Ignition key cylinder light*2
    3. Map light assembly
    4. No. 1 room light assembly
    5. Door mirror foot light
    6. Interior foot light
    7. Inside handle illumination
    8. Courtesy light
    When all doors are closed, the lights that operate turn off.
    Back Door Open/Close-linked
    When back door is opened, the lights that operate turn on.
    Spot light assembly
    When back doors are closed, the lights that operate turn off.
    Engine Switch-linked*1
    Ignition Switch-linked*2
    When the ignition switch is turned from ACC or ON to off, the lights that operate turn on.
    1. Engine switch illumination*1
    2. Ignition key cylinder light*2
    3. Map light assembly
    4. No. 1 room light assembly
    5. Interior foot light
    6. Inside handle illumination
    Battery Saving
    When the doors remain in the same condition for 20 minutes and the key is outside the vehicle exterior detection area, the illumination of the items listed to the right turns off.*1
    When the doors remain in the same condition for 20 minutes and the key is not in the ignition key cylinder, the illumination of the items listed to the right turns off.*2
    1. Engine switch illumination*1
    2. Ignition key cylinder light*2
    3. Map light assembly
    4. No. 1 room light assembly
    5. Interior foot light
    6. Inside handle illumination
    7. Spot light assembly

    1. *1: w/ Smart Key System
    2. *2: w/o Smart Key System


BATTERY SAVING CONTROL SYSTEM
  1. When the interior lights have been illuminated for approximately 20 minutes with the engine switch off, this function turns off all of the interior lights in order to prevent the battery from being depleted.

    HINT:
    When the light control operation conditions are met, battery saving control is canceled.