AUTOMATIC RUNNING BOARD SYSTEM > OPERATION CHECK |
| CHECK AUTOMATIC RUNNING BOARD OPERATION |
When side auto step switch assembly is "AUTO", the operation and condition of this control are described below.
| Operation | Condition |
| Automatic running board is deployed immediately | Open either the front left door or the rear left door. |
| Automatic running board is stowed | When any of the following conditions is met:
|
| Operation | Condition |
| Automatic running board is deployed immediately | Open either the front right door or the rear right door. |
| Automatic running board is stowed | When any of the following conditions is met:
|
The automatic running board does not function when the side auto step switch assembly is OFF.
| CHECK JAM PROTECTION FUNCTION |
Check the jam protection function while the automatic running board is being stowed.
Open the door and fully deploy the automatic running board.
Close the door and stow the automatic running board.
While the automatic running board is being stowed, insert a tire or equivalent between the automatic running board and vehicle body, in order to interrupt the stowing operation.
Check that the jam protection function is immediately activated and that the automatic running board reverses operation and moves to the deployed position.
Check the jam protection function while the automatic running board is deploying.
Close the door and fully stow the automatic running board.
Open the door and deploy the automatic running board.
While the automatic running board is being deployed, interrupt the deploying operation using a tire or equivalent.
Check that the jam protection function is immediately activated and that the automatic running board reverses operation and moves to the stowed position.