Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Illuminated Entry 
    Display
    Default
    Content
    Setting
    Lighting Time
    15s
    Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON).
    7.5s, 15s or 30s
    I/L when ACC OFF
    ON
    A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR).
    ON or OFF
    I/L ON W/Door Key Unlock*2
    ON
    A function that turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR).
    ON or OFF
    Room Light when Aprchd*1
    ON
    A function that turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR).
    ON or OFF
    Inside Foot Light*3
    ON
    Changes the interior foot lights control.
    ON or OFF
    Mirr-Foot-Lgt Approached*4
    ON
    Door mirror foot light (when approaching vehicle)
    ON or OFF
    Mirr-Foot-Lgt Unlocked*4
    ON
    Door mirror foot light (when unlocking doors)
    ON or OFF
    Mirror Foot Light Time*4
    15s
    Door mirror foot light illumination duration
    0s, 7.5s, 15s or 30s
    Light Control*5
    ON
    Changes the inside handle illumination control.
    ON or OFF
    Interior Light Control
    ON
    Changes the engine switch illumination*1 or ignition key cylinder light*2 control.
    ON or OFF
    Exterior Light Control*4
    ON
    Changes the door mirror foot light control.
    ON or OFF

    1. *1: w/ Smart Key System
    2. *2: w/o Smart Key System
    3. *3: w/ Interior Foot Light
    4. *4: w/ Door Mirror Foot Light
    5. *5: w/ Inside Handle Illumination