Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH THE TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Light Control 
    Display
    Default
    Content
    Setting
    Disp Ex OFF Sen
    NORMAL
    Changes brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light.*1
    LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
    Disp Ex ON Sen
    NORMAL
    canceling lowering lights such as the combination meter indicator light, A/C indicator light, and clock light.*2
    LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
    Light Auto OFF Delay
    30s
    Function to continue illuminating the headlights for a certain period of time after closing all the doors with the ignition switch turned from ON to off under the condition that the headlight dimmer switch is at head or AUTO with the headlight on.
    OFF, 30s, 60s or 90s
    Sensitivity
    Normal
    A function to adjust the ambient light sensitivity of the automatic light control system.*3
    Light2, Light1, Normal, Dark1 or Dark2
    DRL Function
    ON
    A function that enables or disables the DRL.
    ON or OFF

    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


    *1 
    Brightness of lowering the lights

    E107164

    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    *2 
    Brightness when canceling the lowering of the lights

    E107164

    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    *3 
    Lighting brightness

    E107164

    Setting
    Dark2
    Dark1
    Normal
    Light1
    Light2