Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER

FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


B239582E01
  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.4 to 4.2 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the front seat cushion heater assembly LH.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater assembly LH)



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


B239583E01
  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.4 to 4.2 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the front seat cushion heater assembly RH.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater assembly RH)