Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR

REAR WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT REAR WIPER MOTOR AND BRACKET ASSEMBLY


    E196889E05
  1. Check the wiper intermittent operation.

    1. Connect the positive (+) lead of the battery to terminal 5 (L) and the negative (-) lead to terminal 4 (E), and check that the motor operates.

      OK:
      Motor operates.

      Text in Illustration 
      *1
      Component without harness connected
      (Rear Wiper Motor and Bracket Assembly)
      If the result is not as specified, replace the rear wiper motor and bracket assembly.