Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK BUZZER

WIRELESS DOOR LOCK BUZZER > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE FRONT FENDER MUDGUARD LH (w/o Intuitive Parking Assist System)


    B353242
  1. Remove the 2clips, 3 screws and front fender mudguard LH.



3. REMOVE ROCKER PANEL MOULDING COVER LH (w/o Intuitive Parking Assist System)


    B353449
  1. Remove the screw.

  1. Detach the 2 clips to remove the rocker panel moulding cover LH.



4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH (w/o Intuitive Parking Assist System)


    B353451E01
  1. Put protective tape around the front fender moulding sub-assembly LH.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the grommet.

  1. w/ Intuitive Parking Assist System:

    1. Remove the clip.



    B354488
  1. Remove the 6 screws.

  1. Using a moulding remover, detach the 9 clips to remove the front fender moulding sub-assembly LH.

  1. Remove the 9 clips.



5. REMOVE FRONT FENDER LINER LH (w/o Intuitive Parking Assist System)


    B352347
  1. Remove the 5 screws.



    B352346
  1. Remove the 13 grommets and front fender liner LH.

    HINT:
    The grommets need to be replaced with new ones because they will break when they are removed.



6. REMOVE FRONT FENDER MUDGUARD LH (w/ Intuitive Parking Assist System)


    B295842
  1. Remove the 2 clips, screw and front fender mudguard LH.



7. REMOVE ROCKER PANEL MOULDING LH (w/ Intuitive Parking Assist System)
  1. Put protective tape around the rocker panel moulding LH.

  1. Remove the 4 screws.



  1. Detach the 15 clips to remove the rocker panel moulding LH.


    B353494E01


    Text in Illustration 
    *1
    Protective Tape
    -
    -



8. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH (w/ Intuitive Parking Assist System)


    B353451E01
  1. Put protective tape around the front fender moulding sub-assembly LH.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the grommet.

  1. w/ Intuitive Parking Assist System:

    1. Remove the clip.



    B354488
  1. Remove the 6 screws.

  1. Using a moulding remover, detach the 9 clips to remove the front fender moulding sub-assembly LH.

  1. Remove the 9 clips.



9. REMOVE FRONT FENDER LINER LH (w/ Intuitive Parking Assist System)


    B352349
  1. Remove the clip and 7 screws.



    B352348
  1. Remove the 13 grommets and front fender liner LH.

    HINT:
    The grommets need to be replaced with new ones because they will break when they are removed.



10. REMOVE WIRELESS DOOR LOCK BUZZER


    B237237
  1. Disconnect the connector.

  1. Detach the clamp to remove the wireless door lock buzzer.