SHIFT LEVER > REMOVAL |
| 1. REMOVE REAR CONSOLE BOX ASSEMBLY |
Remove the rear console box (Click here).
| 2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Move the shift lever to N.
![]() |
Disconnect the transmission control cable end from the shift lever.
![]() |
Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.
| 3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY |

Disconnect the 3 connectors and detach the 4 wire harness clamps.
Remove the 4 bolts and transmission floor shift.
| 4. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET |
Remove the 2 screws and console box mounting bracket.