SHIFT LEVER > DISASSEMBLY |
| 1. REMOVE SHIFT LEVER CAP |
| 2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Detach the 4 claws and remove the floor shift position indicator housing.
| 3. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Detach the wire connector clamp from the position indicator housing.
Rotate the indicator light wire socket counterclockwise to align the key part and remove the wire.
![]() |
Remove the cap and bulb from the indicator light wire socket.
| 4. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY |
Disconnect the shift lock solenoid connector from the shift lock control ECU.
![]() |
Detach the 3 claws and remove the shift lock control ECU from the transmission floor shift.