AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) > Generator Signal Circuit |

| 1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - GENERATOR) |
Disconnect the F42 amplifier connector.
Disconnect the C5 generator connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| F42-25 (ALT) - C5-3 (M) | Always | Below 1 Ω |
| F42-25 (ALT) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||