Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REMOVAL

for Preparation Click here



1. REMOVE ENGINE WIRE


2. DISCONNECT HEATER WATER HOSE ASSEMBLY


    A225417
  1. Disconnect the 2 hoses and remove the heater water hose assembly.



3. REMOVE NO. 1 EMISSION CONTROL VALVE SET


    A225367
  1. Remove the 3 nuts and No. 1 emission control valve set.



4. REMOVE NO. 2 EMISSION CONTROL VALVE SET


    A225368
  1. Remove the 3 nuts and No. 2 emission control valve set.



5. REMOVE IGNITION COIL ASSEMBLY


    A224724
  1. Remove the 6 bolts and 6 ignition coils.



6. REMOVE REAR CYLINDER HEAD COVER


    A224695
  1. Remove the 3 bolts and cover.



7. REMOVE FUEL PIPE SUB-ASSEMBLY


    A226555
  1. Disconnect the 2 fuel pipes (Click here).

  1. Remove the 2 bolts and fuel pipe.



8. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A223037
  1. Disconnect the 6 fuel injector connectors.

  1. Remove the 4 bolts and fuel delivery pipe together with the 6 fuel injectors.

    NOTICE:
    Be careful not to drop the injectors when removing the fuel delivery pipe.



9. REMOVE FUEL INJECTOR ASSEMBLY


    A223038E01
  1. Remove the 6 fuel injectors from the fuel delivery pipe.
    Text in Illustration 
    *1
    Fuel Delivery Pipe
    *2
    Fuel Injector

  1. Remove the O-ring and injector vibration insulator from each fuel injector.



10. REMOVE INTAKE MANIFOLD


    A221466
  1. Remove the 4 nuts, 6 bolts, intake manifold and 2 gaskets.



11. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY


    A223013
  1. Disconnect the 2 hoses.

  1. Remove the 3 bolts and water by-pass pipe sub-assembly.



12. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY


    A158544
  1. Remove the bolt and No. 1 idler pulley sub-assembly.



13. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


A223006
  1. for Separate Type:
    Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulley sub-assemblies and 2 No. 2 idler pulley cover plates.

  1. for Integrated Type:
    Remove the 2 bolts and 2 No. 2 idler pulley sub-assemblies.



14. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    A222180
  1. Remove the 5 bolts and V-ribbed belt tensioner assembly.



15. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    A222114
  1. Remove the engine oil level dipstick.

  1. Remove the bolt and engine oil level dipstick guide.

  1. Remove the O-ring from the engine oil level dipstick guide.



16. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    A221156
  1. Remove the 3 bolts and front No. 1 engine mounting bracket LH.



17. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH


    A221155
  1. Remove the 4 bolts and front No. 1 engine mounting bracket RH.