Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



METER GAUGE AND WARNING/INDICATOR

E220703E01


Text in Illustration 
*1
Tachometer
*2
Speedometer
*3
Multi-information display
  1. Cruise information display
  2. Advisory display
  3. Compass
  4. Road surface freezing
  5. Outside temperature
  6. ODO/TRIP meter
*4
Fuel receiver gauge
*5
Engine coolant temperature receiver gauge
-
-

Meter/Gauge 
Item
Details
Tachometer
The combination meter receives an engine speed signal from the ECM and the gauge needle operates (CAN).
Speedometer
Based on a signal received from the wheel speed sensors, the master cylinder solenoid (skid control ECU) calculates the vehicle speed and transmits data to the combination meter (CAN).
ODO/TRIP meter
  1. The combination meter receives a vehicle speed pulse integration signal from the master cylinder solenoid (skid control ECU) and the ODO/TRIP meter display operates (CAN).
  2. The ODO/TRIP meter display changes when the ODO/TRIP switch is operated.
Fuel receiver gauge
The combination meter receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).
Engine coolant temperature gauge
The combination meter receives an engine coolant temperature signal from the ECM and the gauge needle operates (CAN).

Warning/Indicator 
Item
Details
Driver and passenger side seat belt warning light
E146786
Receives driver seat belt signals (unfastened) from the main body ECU (multiplex network body ECU) (CAN).
Receives passenger seat belt signals (unfastened) from the airbag sensor assembly (CAN).
Open door warning light
E146785
Receives door open signals from the main body ECU (multiplex network body ECU) (CAN).
High beam indicator light
E146782
Receives high beam indicator light signals from the main body ECU (multiplex network body ECU) (CAN).
Cruise indicator light
E176835
Receives a cruise control switch signal from the ECM (CAN).
Set indicator light
E176834
Receives a cruise control switch signal from the ECM (CAN).
Oil pressure warning light
E189537
Receives an oil pressure sensor signal from the ECM (CAN).
SRS warning light
E146784
Receives malfunction signals from the airbag sensor assembly (CAN).
Tire pressure warning light
E146805
Receives a low tire pressure signal from the tire pressure warning ECU (CAN).
MIL*1
E237942
Receives malfunction signals from the ECM (Direct line).
MIL*2
E156496
Receives malfunction signals from the ECM (Direct line).
CHARGE warning light
E146789
Receives malfunction signals from the generator assembly (Direct line and CAN).
HEAD indicator light*1
E146798
The indicator turns on when a taillight illumination signal is received (CAN).
TAIL indicator light*2
E146799
The indicator turns on when a taillight illumination signal is received (CAN).
SLIP indicator light
E154783
Receives malfunction signals from the master cylinder solenoid (skid control ECU) (CAN).
VSC OFF indicator light
E221149
Receives a VSC OFF signal from the master cylinder solenoid (skid control ECU) (CAN).
AUTO LSD indicator light*3
E146801
Receives an AUTO LSD signal from the master cylinder solenoid (skid control ECU) (CAN).
A-TRAC indicator light*4
E199167
Receives an A-TRAC signal from the master cylinder solenoid (skid control ECU) (CAN).
CRAWL indicator light*5
E154778
Receives CRAWL signals from the master cylinder solenoid (skid control ECU) (CAN).
Downhill assist control indicator light*6
E157280
Receives downhill assist control indicator signals from the master cylinder solenoid (skid control ECU) (CAN).
TRAC OFF indicator light
E191458
Receives a TRAC OFF signal from the master cylinder solenoid (skid control ECU) (CAN).
ABS warning light*1
E146791
Receives malfunction signals from the master cylinder solenoid (skid control ECU) (CAN).
ABS warning light*2
E146792
Receives malfunction signals from the master cylinder solenoid (skid control ECU) (CAN).
Brake warning light*1
E237941
  1. Comes on when the parking brake switch is on (CAN).
  2. Brake fluid level warning switch is on (CAN).
  3. Vehicle stability control system is malfunctioning.
Brake warning light*2
E146788
4WD indicator light*7,*8
E206616
Receives signals from the four wheel drive control ECU (CAN).
4LO indicator light*4
E146790
Receives 4LO signals from the four wheel drive control ECU (CAN).
Center differential lock indicator light*7, *9
E220709
Receives a center differential lock switch on signal from the four wheel drive control ECU (CAN).
A/T P indicator light*7
E154780
Receives a shift position P signal and transfer neutral signal from the ECM (CAN).
Receives a transfer neutral signal from the four wheel drive control ECU (CAN).
Rear differential lock indicator light*10
E220710
Receives a rear differential lock signal from the four wheel drive control ECU (CAN).
Front fog indicator light
E157274
The indicator turns on when a front fog indicator light illumination command signal is received (CAN).
Fuel level warning light
E146794
Receives signals from the fuel sender gauge indicating low or no fuel (Direct line).
Turn signal indicator light (LH/RH)
E146800
Receives a turn signal from the FLASHER relay (Direct line).
Eco driving indicator light
E176838
Receives an ecology lamp indicator signal from the ECM (CAN) and illuminates when the vehicle is being driven ecologically.
Kinetic dynamic suspension system indicator light*11
E197416
Receives kinetic dynamic suspension system indicator signals from the stabilizer control ECU (CAN).
Smart key indicator light*12
E157288
Receives a key signal from the certification ECU (smart key ECU assembly) (CAN).
Multi terrain select indicator light*5
E196310
Receives multi terrain select signals from the master cylinder solenoid (skid control ECU) (CAN).
PPS warning light
E176836
Receives power steering warning signals from the power steering ECU assembly (CAN).
Master warning light
E146806
Receives warning signal from each ECU (CAN)
Automatic Running Board warning light*13
E237429
Receives a automatic running boards signal from the side auto step controller ECU assembly (Direct line).
  1. *1: for U.S.A.
  2. *2: except U.S.A.
  3. *3: for 2WD
  4. *4: for 4WD
  5. *5: w/ CRAWL Control
  6. *6: w/ Downhill Assist Control System
  7. *7: for VF2A Transfer
  8. *8: for VF2BM Transfer
  9. *9: for VF4BM Transfer
  10. *10: w/ Rear Differential Lock
  11. *11: w/ Kinetic Dynamic Suspension System
  12. *12: w/ Smart Key System
  13. *13: w/ Automatic Running Board System

MULTI-INFORMATION DISPLAY


  1. The information displayed changes in the following order each time the ODO/TRIP switch is pressed.


    E239703E01


    Text in Illustration 
    *a
    ODO
    *b
    TRIP A
    (If the ODO/TRIP switch is pressed for 0.8 seconds or more, the TRIP A display is re set.)
    *c
    TRIP B
    (If the ODO/TRIP switch is pressed for 0.8 seconds or more, the TRIP B display is reset.)
    -
    -



  2. The multi-information display flow can be switched as shown in the flow chart below:


    E221159E01


    No.
    Transition Condition
    *1
    If the display conditions for 2 or more messages are met, relevant messages are alternately displayed for 2 seconds each.
    *2
    Conditions are not met and all new messages have been displayed.
    *3
    If the ignition switch is turned off during the "Opening" display, the "Opening" display will be shown from the beginning.
    *4
    Models for U.S.A.
    *5
    Mode has completed or reset mode is interrupted.
    *6
    If the DISP switch is used to change from an advisory message to the cruise information display screen, repeatedly operating the DISP switch will cycle through the cruise information screens and then return the advisory message if the display conditions are still met.
    *7
    If the DISP switch is not operated for more than 6 seconds with any of the caution or warning message display conditions still met, the relevant caution or warning messages are displayed.

    Item
    Detail
    Cruise information display
    Average fuel consumption
    6 types of information (average fuel consumption, current fuel consumption, cruising range, elapsed time, vehicle speed and steering angle) can be displayed.
    Current fuel consumption
    Cruising Range
    Elapsed Time
    Vehicle Speed
    Steering Angle
    ECO driving indicator zone display
    In addition to the cruise information display, the combination meter assembly indicates the ECO driving indicator zone display.
    Setting
    Displays the customized setting of each item.
    Advisory display
    Each system advisory
    Interrupts the multi-information display immediately when an advisory occurs.