Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH

UNLOCK WARNING SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY


  1. If reusing the unlock warning switch assembly:



      B239746E01
    1. Install the unlock warning switch.
      Text in Illustration 
      *1
      Pin Cap
      V100135
      Slide

    2. Install the pin cap.



    3. B237292
    4. Connect the unlock warning switch connector.

    5. Attach the 3 claws to install the cover.



    B237294E01
  1. If replacing the unlock warning switch assembly:

    1. While pushing the pin, slide the unlock warning switch to install it.
      Text in Illustration 
      *1
      Pin
      V100135
      Slide



    2. B239749
    3. Connect the unlock warning switch connector.



2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch assembly.

  1. Connect the 2 connectors.



3. INSTALL UPPER STEERING COLUMN COVER
  1. Attach the claw to install the upper steering column cover.

  1. Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.



4. INSTALL LOWER STEERING COLUMN COVER
  1. Attach the 2 claws to install the lower steering column cover.

  1. Turn the steering wheel to the right and left and install the 2 screws.