LUGGAGE SPEAKER > INSPECTION |
| 1. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 (WF1+) - 3 (WF1-) | Always | 1.6 to 2.4 Ω |
| 2 (WF2+) - 4 (WF2-) | Always | 1.6 to 2.4 Ω |
| *a | Component without harness connected (No. 1 Speaker Assembly with Box) |