Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 8 Speakers)


    E144966E37
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    4 Ω

    If the result is not as specified, replace the speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 1 Speaker Assembly)



2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 9 Speakers)


    E144966E37
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.4 to 2.2 Ω

    If the result is not as specified, replace the speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 1 Speaker Assembly)